60V 2000A IGBT type Hard anodizing rectifier, adopting 4 modules in parallel, each module current 500A, touch screen control, RS485 Communication interface, Self-protective function under the abnormal situations such as over/Low-voltage, over-current, default phase，short circuit, overheating and so on. If one of the modules has a problem, you can remove the bad module without stopping production, to ensure that the production is carried out normally.
For common anodizing rectifier, output voltage is generally in the range of 18V~24V, output current is 4000A, 6000A, 12KA and so on. Hard Anodizing Project in Canada requires higher voltage (e.g., 80V, 100V) due to thicker oxide film formation during hard anodizing.
