Turckey 10V 8000A IGBT type Nickel Plating ProjectOur customized IGBT-based rectifier system has been successfully implemented in nickel electroplating operations for a Turkish client. The water-cooled configuration employs dual parallel-connected modules with hot-swap capability, allowing maintenance technicians to replace components…
Hard Anodizing Project in Canada requires higher voltage (e.g., 80V, 100V) due to thicker oxide film formation during hard anodizing.
The customer's factory is in Peru and is a professional metal processing factory.
The Spanish anodizing facility utilizes a 20V 3000A IGBT air-cooled rectifier system with dual 1500A modules operating in parallel configuration. This modular design allows continuous production maintenance – if any module fails, technicians can swiftly replace the malfunctioning unit through…
Adopt 2+1 standby design according to the customer's usage environment and production situation in the Chrome Plating Project in Iran.
Electroplating Rectifier Project in Thailand: 94% efficient IGBT rectifiers' sealed airflow slashed downtime 30%, spurring reorders.
The Chrome Plating Project in Germany features specially designed 15V 600A Electroplating Rectifiers for a large-scale metal processing factory. This advanced setup supports high-precision, premium-quality production in their state-of-the-art plating lines. Six units of 15V 600A plating rectifiers are utilized for both…
The Aluminum Anodizing Project in Indonesia uses a 22V 22KA IGBT rectifier with 8 parallel modules (3000A each) in a 7+1 standby mode. The system typically uses 8 modules, though not all operate at full load. If a module fails,…
±10V 12KA polarity switching IGBT type rectifier for hard chrome plating production line. Polarity reversal ensures a uniform plating layer, while adopting an N+1 design according to the customer’s usage environment and production needs. If one module fails, it can…
The factory, located in Dubai, UAE, is a professional manufacturer specializing in metal processing, cutting, and fabrication. After metal processing, the fabricated metal parts require galvanization, a key process in the electroplating and surface treatment industry. Currently, the rectifiers used in…
